|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Typical Applications The HMC865LC3C is ideal for: * 100 Gbps Ethernet Features Supports Data Rates up to 43 Gbps. Low Power Dissipation: 300 mW @ Vcc = +3.3V Differential Small Signal Gain: 30 dB High Input Sensitivity: 10 mVp-p Differential 3-dB Bandwidth: 26.5 GHz Adjustable Output Voltage Swing up to 800 mVp-p Differential 16 Lead 3x3mm SMT package: 9mm2 10 LIMITING AMPLIFIERS - SMT * 100 Gbps Long Haul * 40 Gbps (D)QPSK Receivers * Broadband Gain Block for Test & Measurement Equipment Functional Diagram General Description The HMC865LC3C is a Limiting Amplifier packaged in a leadless 3x3 mm ceramic surface mount package which supports up to 43 Gbps operation. The amplifier provides 30 dB of differential gain. Output voltage swing is adjustable up to 800 mVp-p differential by using the VAC analog control input. Additive rms jitter is less than 300 fs for 32 Gbps operation. HMC865LC3C has an internal DC offset correction circuit which provides differential 10 mVpp input sensitivity. All input/output RF signals of the HMC865LC3C are terminated with 50 Ohms to +3.3V on chip and may be either AC or DC coupled. The outputs of the device can be operated either differentially or singleended. Outputs can be connected directly to 50 Ohm terminated system referenced to 3.3V, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non 3.3V level. Electrical Specifi cations, TA = +25 C, Vcc = +3.3V, Vee = 0V, Icc = 90mA Parameter Differential Small Signal Gain Data Rate Small Signal Bandwidth Input Return Loss Output Return Loss Input Sensitivity Maximum Input Swing Differential Output Swing Rise Time [1] 3-dB cutoff Up to 26.5 GHz Up to 26.5 GHz Differential Differential Adjustable by using VAC 20% - 80% @ 32 Gbps 250 13 10 10 10 1,000 800 Conditions VAC = 1.6V 32 26.5 Min. Typ. 30 Max. Units dB Gbps GHz dB dB mVp-p mVp-p mVp-p ps [1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern 10 - 12 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Electrical Specifi cations (Conditions) Parameter Fall Time [1] Additive Random Jitter [2] Conditions 20% - 80% @ 32 Gbps Vin = 50 mVp-p (Differential) @ 15 GHz @ 25 GHz Min. Typ. 13 Max. Units ps 300 31 32 1 1.6 -6 3.13 3.3 90 -40 25 10 85 3.47 fs nV/rtHz nV/rtHz V Input referred voltage noise VAC Output P1dB Power Supply Voltage Supply Current Operating Temperature Low Frequency Cut-Off 10 LIMITING AMPLIFIERS - SMT 10 - 13 @ 16 GHz dBm V mA C kHz VAC = 1.6V 100 nF off chip capacitor is used [1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern [2] Random jitter is measured with 32 Gbps 10101... pattern Differential Gain & Return Loss vs. Frequency [1][2] 40 30 20 Differential Output vs. Supply Voltage [1] 1000 DIFFERENTIAL VOLTAGE (mVp-p) RESPONSE (dB) 10 0 -10 -20 -30 -40 0 5 10 800 S21 S11 S22 600 +25C +85C -40C 15 20 25 30 35 40 400 3.13 3.19 3.24 3.3 3.36 3.41 3.47 FREQUENCY (GHz) SUPPLY VOLTAGE Vcc (V) Differential Output vs. Control Voltage [2] 1000 Differential Output vs. Vinput & Temperature @ 16 GHz [1][2] 1000 DIFFERENTIAL VOLTAGE (mVp-p) 800 600 DIFFERENTIAL VOLTAGE (mVp-p) 100 +25C +85C -40C 400 200 +25C +85C -40C 0 1 1.1 1.2 1.3 1.4 1.5 1.6 10 1 10 100 1000 CONTROL VOLTAGE VAC (V) SINGLE-ENDED Vin (mVp-p) [1] VAC = 1.6V [2] Vcc = 3.3V For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Differential Output vs. Vinput & Supply Voltage @ 16 GHz [1] 1000 Differential Output vs. Vinput & Frequency [1] [2] DIFFERENTIAL VOLTAGE (mVp-p) 1000 10 LIMITING AMPLIFIERS - SMT DIFFERENTIAL VOLTAGE (mVp-p) 100 Vcc = 3.30V Vcc = 3.13V Vcc = 3.47V 100 2 GHz 10 GHz 16 GHz 20 GHz 10 1 10 100 1000 10 1 10 100 1000 SINGLE-ENDED Vin (mVp-p) SINGLE-ENDED Vin (mVp-p) Peak to Peak Jitter vs. Supply Voltage [1][3] 8 7 Rise & Fall Time vs. Supply Voltage [1][3] RISE TIME, FALL TIME 20%-80% (ps) 16 P-P JITTER (ps) 6 12 5 4 8 Rise Time Fall Time 3 2 3.13 3.19 3.24 3.3 3.36 3.41 3.47 4 3.13 3.19 3.24 3.3 3.36 3.41 3.47 SUPPLY VOLTAGE Vcc (V) SUPPLY VOLTAGE Vcc (V) DC Current vs. Supply Voltage [1][3] 150 125 DC Current vs. Control Voltage [2][3] 150 125 DC CURRENT (mA) 100 DC CURRENT (mA) 100 75 +25C +85C -40C 75 +25C +85C -40C 50 50 25 25 0 3.13 0 3.19 3.24 3.3 3.36 3.41 3.47 1 1.1 1.2 1.3 1.4 1.5 1.6 SUPPLY VOLTAGE Vcc (V) CONTROL VOLTAGE VAC (V) [1] VAC = 1.6V [2] Vcc = 3.3V [3] Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS 223 -1 pattern 10 - 14 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER 32 Gbps Single-Ended Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 362 mV 4.978 ps 13.84 ps 13.22 ps Minimum 361 mV 4.822 ps 13.84 ps 11.20 ps Maximum 362 mV 5.444 ps 14.00 ps 13.53 ps Total Meas 63 63 63 10 LIMITING AMPLIFIERS - SMT 10 - 15 63 Time Scale: 7 ps/div Amplitude Scale:100 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS 223-1 pattern 22.5 Gbps Single-Ended Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 388 mV 8.000 ps 14.22 ps 13.78 ps Minimum 387 mV 5.778 ps 13.78 ps 13.33 ps Maximum 388 mV 8.000 ps 14.67 ps 13.78 ps Total Meas 83 83 83 83 Time Scale: 20 ps/div Amplitude Scale: 81.6 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 50 mVp-p 22.5 Gbps NRZ PRBS 223-1 pattern 40 Gbps Single-Ended Output Eye Diagram Measurements Current Eye Amp Jitter p-p Rise Time Fall Time 352 mV 5.333 ps 11.78 ps 12.00 ps Minimum 352 mV 4.444 ps 11.33 ps 11.56 ps Maximum 352 mV 5.333 ps 12.00 ps 12.00 ps Total Meas 60 60 60 60 Time Scale: 10 ps/div Amplitude Scale: 80.1 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Input Data: Differential 80 mVp-p 40 Gbps NRZ PRBS 223-1 pattern For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER 32 Gbps Input & Output Eye Diagrams Input Signal Output Signal 10 LIMITING AMPLIFIERS - SMT Current Eye Amp Jitter p-p Rise Time Fall Time 9.27 mV 10.733 ps 8.56 ps 10.11 ps Minimum 9.25 mV 7.933 ps 8.24 ps 4.04 ps Maximum 9.27 mV 10.733 ps 40.13 ps 10.27 ps Total Meas 36 51 51 51 Current Eye Amp Jitter p-p Rise Time Fall Time 219 mV 5.444 ps 11.93 ps 14.78 ps Minimum 219 mV 4.822 ps 14.78 ps 14.78 ps Maximum 220 mV 5.444 ps 15.40 ps 15.40 ps Total Meas 55 55 55 55 Time Scale: 7 ps/div Amplitude Scale: 2.8 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Time Scale: 7 ps/div Amplitude Scale: 60 mV/div Test Conditions: VAC = 1.6V, Vcc = 3.3V Absolute Maximum Ratings Power Supply Voltage (Vcc) Input Voltage Output Voltage Output Amplitude Control Voltage (VAC) Junction Temperature Continuous Pdiss (T = 85C) (Derate 13.10 mW/C above 85C) Thermal Resistance (Rth) (junction to ground paddle) Storage Temperature Operating Temperature -0.5V to +3.6V (Vcc -1.3V) to (Vcc +0.5) (Vcc -1V) to (Vcc +0.5) -0.5V to +2.5V 125 C 0.52W 76.32 C/W -65 to 125 C -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 10 - 16 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Outline Drawing 10 LIMITING AMPLIFIERS - SMT 10 - 17 NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST NOT BE DC GND. THERMAL DISSIPATION PATH ONLY. Pin Descriptions Pin Number Function Description Interface Schematic 1, 4, 9, 12 GND Signal grounds should be connected to 0V. 2, 3 INP, INN Data Inputs 6, 7 Vee Supply grounds should be connected to 0V. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Pin Descriptions (Continued) Pin Number Function Description Interface Schematic 10 LIMITING AMPLIFIERS - SMT 8 VAC Output amplitude control voltage 10, 11 QN, QP Data outputs. 13, 14 CN, CP Filter capacitor for offset correction. Connect 100nF capacitor between CP and CN 15, 16 Vcc Positive Supply Ground Paddle GND Ground paddle must be connected to DC ground. 10 - 18 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Evaluation PCB 10 LIMITING AMPLIFIERS - SMT List of Materials for Evaluation PCB 128123 [1] Item J1 -J3, J8 J9 - J12 C1, C11 C2, C12 C15 C16, C18 R3, R5, R8 R7 U1 PCB [2] Description DC Pin K-type Connector 0.1 F Capacitor, 0603 Pkg. 1000 pF Capacitor, 0603 Pkg. 0.1 F Capacitor, 0402 Pkg. 4.7 F Capacitor, Tantalum 0 Ohm Resistor, 0402 Pkg. 0 Ohm Resistor, 0603 Pkg. HMC865LC3C Limiting Amplifier 126150 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 19 HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Application Circuit 10 LIMITING AMPLIFIERS - SMT Component C2, C12 C1, C11, C15 C16, C18 Value 1 nF 0.1 F 4.7 F 10 - 20 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC865LC3C v00.1209 32 Gbps LIMITING AMPLIFIER Notes: 10 LIMITING AMPLIFIERS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 21 |
Price & Availability of HMC865LC3C09 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |